top of page

Built to Keep Going: The Light Source’s Eurotech Story

Nov 3
4 min read

After years of lights-out production and millions of parts, The Light Source is giving its first Eurotech machine a new chapter.


For more than a decade, a Eurotech Trofeo has been hard at work at The Light Source in Charlotte, North Carolina. Day after day—and often long after the shop lights went out—it has produced the hardware that helps bring theatrical lighting and rigging systems together.


Recently, that machine made a trip to Eurotech Elite’s Technology Center in Brooksville, Florida, for refurbishment. Brandon Carter, a longtime member of The Light Source team, came along to see the work firsthand and share the story behind the machine.

It’s a story about more than a piece of equipment. It’s about the growth of a company, the value of a dependable machine, and a partnership built over years on the shop floor.




From Three Lathes to a Growing Operation


When Brandon joined The Light Source, the company had three lathes. One was its first Eurotech, which was purchased in 2011.

Coming from a background in mills and lathes, Brandon was familiar with machining, but the twin-turret, twin-spindle machine was a new experience.


“At first, it was a little intimidating,” he said. “Twin turret, twin spindle, 12-axis machines, bar-fed, capable of running lights-out—it’s a pretty impressive machine.”

With training and time at the controls, that first impression turned into confidence. Today, The Light Source has grown to approximately ten lathes, including six Eurotech machines.



One Small Bolt, Millions of Parts




Among the many parts produced on the original Trofeo is a coupler bolt used in approximately 90% of the clamps The Light Source makes.

The bolt was one of the first parts programmed on the machine.



Brandon estimates that, over the years, the Trofeo has produced millions of them.


Today, the cycle time is approximately 58 seconds per part.





“As we’re sitting here talking, there are parts coming off that machine every minute,” Brandon said.

The machine has also given The Light Source flexibility beyond that single part. Brandon said it has approximately 100 programs and can handle a variety of materials and part sizes, helping the company respond to different production needs.

As The Light Source grew, demand for the coupler bolt grew with it. Brandon recalls production of approximately 3,000 bolts per month when he first joined the company. Today, he estimates that number has risen to 15,000–18,000 per month.



Working After the Lights Go Out


For The Light Source, one of the machine’s most valuable capabilities is its ability to keep producing after the workday ends.

With an integrated bar feeder and the right setup, the Trofeo can run unattended, allowing parts to continue coming off the machine while the shop is closed.

“We can come in and get the machine started, and we can walk away,” Brandon explained. “The shop’s closed, and this thing’s still producing parts.”

Those longer runs help The Light Source make productive use of its equipment and keep up with demand. As Brandon put it, the longevity of the runs helps offset the investment in the machines.



Training That Sticks

A capable machine is only part of the story. Knowing how to use it makes the difference.

Early on, Eurotech’s Larry Greenawalt spent time with Brandon at The Light Source, helping him learn the machine and its programming. Larry also helped develop the original program for the coupler bolt—a program Brandon says helped him learn how the machine worked.

“Larry makes it very user-friendly,” Brandon said. “He has a way of explaining things that just kind of sticks.”


That hands-on support is part of Eurotech’s commitment to free lifetime training for its customers. Whether a team is learning a new machine or building on years of experience, the goal is to help them get the most from their investment.






A Partnership Beyond the Sale


Over 13 years at The Light Source, Brandon has become familiar with the machines’ operation and maintenance. When questions come up, he knows he can reach out to the Eurotech team.


He credits the service and support staff, along with regional sales representative David, for helping The Light Source through the years—from walking him through maintenance questions over the phone to arranging assistance when needed.



“They’re very friendly, very easygoing, easy to contact,” Brandon said. “They’ll help you out at the drop of a hat and go out of their way to help you out.”

For Eurotech, those relationships are an essential part of the customer experience. The work doesn’t end when a machine is installed; it continues as customers grow, their applications change, and new questions arise.



Ready for Its Next Chapter


After years of production, The Light Source’s first Eurotech returned to Brooksville for some well-earned attention. The refurbishment gave Brandon and the Eurotech team a chance to look back at everything the machine has accomplished—and prepare it to return to the production floor.

For Brandon, its value goes beyond the parts it has produced.


“It’s made us very profitable, it’s grown our business, and it’s established the friendship and the relationship that we have with Eurotech,” he said.

From its first coupler bolt to millions more, The Light Source’s Trofeo has been there through years of growth. With renewed care and a team that knows it well, it’s ready to keep going.




 
 
 

Comments


bottom of page