Bring Your Machining Challenges to SHOT Show. Let’s Explore What Could Work Better for You.
Meet Eurotech’s engineers at booth #10478 | January 19–22, 2027 | Las Vegas
Every manufacturer has one: the part that takes too many setups, ties up too much labor, or spends more time moving between machines than moving toward completion.
This January, bring that challenge to Eurotech at SHOT Show.
Bring a part, a print, or the production problem your team has been working around. Our engineers will work with you to explore a better way to manufacture it—with the goal of completing more of the part in one operation, reducing secondary work, and improving production.
Too Many Operations? Start Here.
A shorter machining cycle matters. So does everything surrounding it: setups, handling, parts waiting between operations, and the labor needed to keep production moving.
That’s why a conversation with Eurotech starts with your application.
Where is the bottleneck? Which operations require another setup? What is keeping your team from reaching the output you need?
Eurotech’s Swiss-style and multi-axis machining solutions offer different approaches to complex firearms components. Our engineering team can help evaluate opportunities to consolidate operations, reduce handling, and match the process to your production requirements.
The part you’ve always made a certain way may deserve a fresh look.
Eurotech connecting with manufacturers and discussing machining challenges at a previous SHOT Show.
KelTec: A Different Process. A Dramatic Change in Output.
KelTec’s experience shows why that fresh look can matter.
In Eurotech’s published customer story, Adrian Kellgren describes how production of the P17 bolt changed when the application moved to a Eurotech Rapido. Output increased from 45 parts per shift on a single horizontal machine to 185 parts per shift on a single Eurotech.
The story also reports that KelTec’s Sub2000 bolt cycle time dropped from 7 minutes to 2 minutes, 45 seconds.
These results came from specific customer applications, but they demonstrate the value of reconsidering how a complex part moves through production.
SSK Firearms: Keeping Quality at the Center
Production improvements also need to support the quality of the finished part.
In Eurotech’s published SSK Firearms case study, owner Dave Fricke discusses the importance of rigidity, repeatability, and dependable machining. The story reports that SSK performs its barrel machining on Eurotech’s TD Toro, except for chambering.
“Done in One Manufacturing is paramount to manufacturing gun barrels.”— Dave Fricke, Owner, SSK Firearms
It’s another reason to bring your application to the conversation. Whether your priority is fewer operations, greater consistency, or increased output, the manufacturing process needs to support the requirements of your part.
[ADD SSK TECHNICIAN-AT-MACHINE PHOTO OR BARREL LINEUP HERE]
Bring the Challenge. Talk Through the Possibilities.
Make your time at SHOT Show count by bringing a real production challenge to Eurotech’s engineers.
That might be:
A complex part requiring multiple setups.
A secondary operation consuming too much labor.
A cycle time limiting your output.
A new application that needs a different manufacturing approach.
Bring a sample part or a print you’re able to share, along with your current process and production goals. Our team can discuss your application, explore potential improvements, and help identify the next steps.
Visit Eurotech at SHOT Show 2027 to discuss your next manufacturing challenge with our engineers.
Meet Us at SHOT Show 2027
January 19–22, 2027Las Vegas, NevadaEurotech Booth #10478
Schedule a time to meet with our engineers. Bring us the difficult part—the one taking too many operations, too much labor, or too much time—and let’s talk about how to improve the process.
Or call 352-799-5223 to arrange a booth meeting.
Bring us the difficult part. Let’s find a better way to make it.












Comments