NEWS & EVENTS
|
Case Studies
|
Events
|
White Papers
|
Newsletters
|
Home
Eurotech Trofeo 11-Axis Turn/Mill Center!
Company: Accutronics
Mfg. Manager: Troy Jones
"We are extremely pleased with the machine. I'd
love to buy three more right now. Tolerances held
on the machine have been excellent, Jones reports."
love to buy three more right now. Tolerances held
on the machine have been excellent, Jones reports."
140 North Gasoline Alley, Indianapolis, IN 46222
phone: (317) 243-9585 fax: (317) 484-1736
Frank Weiss, Owner of FWRC, manufacturer of
racing components, choose the Eurotech 710SLLY
for its speed, accuracy, finish and thermal stability.
racing components, choose the Eurotech 710SLLY
for its speed, accuracy, finish and thermal stability.
Location: Gainesville, Florida
Staff: 100 employees, building 6100 sq. ft.
After much research, Fabco-Air found their answer
at Eurotech Elite: Eurotech’s turn/mill center with
y–axis and two spindles with c–axis — the B545SLY.
at Eurotech Elite: Eurotech’s turn/mill center with
y–axis and two spindles with c–axis — the B545SLY.
Company: Chasco Machine and Manufacturing
Owner: Jeff Roth, Brooksville, Florida
"I believe productivity should be based on dollars
per man hour paid; and the Eurotech gives us
the best productivity. My shop is a testimony to
Eurotech's high tech, multi axis machines..."
per man hour paid; and the Eurotech gives us
the best productivity. My shop is a testimony to
Eurotech's high tech, multi axis machines..."
Company: Profile Racing
Owner: Jim Alley
"Profile Racing is the single largest, most capable
and sophisticated manufacturer of high end BMX/
MTB bicycle components and BMX frames in the
United States, boasting over 35 years of experience."
and sophisticated manufacturer of high end BMX/
MTB bicycle components and BMX frames in the
United States, boasting over 35 years of experience."
Company: Kadon Precision Machining
Owners: Jeff and Justin Franklin
"The addition of these machines.." (Eurotech BV
Series Inverted Vertical Turning Centers) "..to our
inventory has been a boon for enhancing our
strategy of being a one-stop shop."
Series Inverted Vertical Turning Centers) "..to our
inventory has been a boon for enhancing our
strategy of being a one-stop shop."
Company: Chasco Machine and Manufacturing
Owners: Jeff Roth
"The multispindle machines enable Chasco to
use one machine to produce parts that otherwise
would require secondary operations, and the
robot; permits low-cost, untended work."
use one machine to produce parts that otherwise
would require secondary operations, and the
robot; permits low-cost, untended work."
Long Lead Times & Costly Prototypes!
Company: Ikelite
Owners: Ike Brigham
"I’m absolutely sold on the Eurotech products –
starting from the distribution network, the factory
to the finished part – everyone is top notch."
starting from the distribution network, the factory
to the finished part – everyone is top notch."
Studies
