|
EUROTECH MCM » Landing Gear Cutting Demo SELECTING The RIGHT BAR
MACHINE For The JOB - - - EUROTECH Fixed Headstock VS SWISS Sliding Headstock 
|
 |
|
|
|
EUROTECH » Watch 4- Tools in the Cut with Y-axis LNTS-Y provides Y-axis versatility,
sub-spindle flexibility, multi-slide productivity to allow machining of complex parts in 1 operation
|
 |
|
|
|
EUROTECH » Special Rifle Barrel Profile Process B1200 provides maximum long-
shaft precision with synchronized steady-rest and tooling through- out rifle barrel profile machining
|
 |
|
|
|
EUROTECH » CAM vs LICO CNC Machining CNC Automatics deliver increased
feed accuracy, precise tooling and machining, reduced labor costs, and materials flexibility
|
 |
|
|
|
EUROTECH » 35% Faster than Mori Load redundant tools for lights-out
unattended machining to eliminate setup times, and complete complex parts in one operation
|
 |
|
|
|
710SLLY » Eurotech vs Tool Change Load up to 48 live tools for milling
operations to greatly reduce cycle times and virtually eliminate secondary operations
|
 |
|
|
|
420SLLY » Multi-Tool Marvel Load up to 192 cutting tools for
machining of complex parts, and reduction of setup time, handling, inspections and scrap rate
|
 |
|
|
|
SHAFT WORK » Main and Sub-spindle Demo Synchronized rotation between
main and sub-spindle allows pre- cise machining and finishing of long shaft parts in one operation
|
 |
|
|
|
EUROTECH » SwissTurn 42-2Y Demo The (2)Y-axis Swiss-type CNC
Automatic offers up to 10-axis complex machining using an ad- vanced muli-axis control system
|
 |
|
EUROTECH » Special Pistol Barrel Cutting Demo Two Y-axis Turrets, a Clear-Shift
Sub-Spindle, and a Programmable Parts Catcher ensure this complex barrel process 1-op profitability
|
 |
|
|
|
LONG SHAFT » Clear-Shift Spindle Demo The Clear-Shift Sub-Spindle elimi-
nates most interference problems, improves cycle times, and allows safer, simpler and faster setups
|
 |
|
|
|
EUROTECH » Slash Set-up Times Eliminate chucking, grippers and
hours of set-up time with Eurotech vertical spindle CNC lathe advanc- ed stock handling technology
|
 |
|
|
|
EUROTECH » BV Machining Demo With Y-axis capability the BV
vertical lathe is a complete turn- mill center achieving off-center ops impossible with C-axis only
|
 |
|
|
|
EUROTECH » LNT-D CNC Machining Multi-Tool/Slide; 5 Tools in-the-Cut
Machining, Small Foot Print, CNC Accuracy, Very Short Turning Cycles and Great Surface Finish
|
 |
|
|
|
EUROTECH » Drill-Drill Demo Simultaneous boring, drilling, re-
cessing, ID threading, and C-axis milling on Main and Sub-spindle with dual front/back working tools
|
 |
|
|
|
EUROTECH » LNT-S CNC Machining Ultra-fast Efficient Machining with
3 compound slides, 8-position live tool servo-turret, live tool back machining and parts catcher
|
 |
|
EUROTECH » Gear Hobbing Demo The adjustable angle, gear hobbing
tool for CNC lathes allows cutting of gears & splines along with other turning for complete parts in 1-Op
|
 |
|
EUROTECH » SWISS IS DEAD!!! SELECTING The RIGHT BAR
MACHINE For The JOB - - - EUROTECH Fixed Headstock VS SWISS Sliding Headstock
|
 |
