in Lot Sizes of 100 Pieces or More?
 Dear CNC Metal Cutting Executive, For most businesses a 25% improvement in cycle time in their part will translate to over 300% more ROI for their machine tools. EUROTECH TURNING CENTERS RUN PARTS FASTER - THE DIFFERENCE BETWEEN: 1. profitability and bankruptcy 2. selecting "good" work and taking on work just to "keep the machines going" 3. maintaining your best jobs or losing them to Asian competitors Over 5,000 customers worldwide have 500 here in the North America have discovered that there is a fast, economical machine tool available which allows them to achieve faster cycle times (many customers achieve much more than 25% IMPROVEMENT!) In fact, we are so confident that, if you have a current application for a turning center, we will provide your company with a FREE part analysis. TAKE THE EUROTECH CHALLENGE - allow us to show you how much faster the Eurotech turning center can produce your company's part - even using the same speeds and feeds as the other machines your company is considering. TAKE THE CHALLANGE TODAY AND WE WILL SEND YOU A FREE SANDVIK CERTIFICATE WORTH UP TO $600.00 PLUS A FREE REPORT ON IMPROVING ROI USING Y-AXIS TURNING CENTERS - . . . JUST FOR TAKING THE CHALLENGE. |
Part shown ran 30% faster on a Eurotech dual turret machine than the Japanese competitors could run! In fact, the competitor, when learning of the estimated cycle time, said "IMPOSSIBLE!". -17-4PH Stainless Steel-32 micro finish -0.0002 tolerance on diameters -0.0008 run-out on 3 bearing surfaces across 11 inches -UNDER A 2 MINUTE CYCLE COMPLETE!! |
The Eurotech machine ran the part over 35% faster than the Japanese dual turret machine and allowed the customer to bring the part back "in house". This part was machined out of bar stock in 68 seconds, complete with a hex and a long internal drilling operation, requiring 1,000 PSI coolant. |
How is it possible?
|
Most customers initially ask us, How is it possible? -don't our existing turning centers have fast (maybe faster) rapid speeds and cut time is basically the same on any machine? |
|
The answer and secret is that the Eurotech machines are designed from the ground up to be fast and automated. Some of the unique features that allow our machines to be faster: - indexing on the fly - elimination of dwell times - for subspindle machines, pick-off speeds that are simply incredible - for live tool machines, zero wait for C-axis engagement - ClearShift subpsindles to eliminate interference on dual turret machines - built in, not "add-on" automation - CNC controls loaded with "options" |
|
Your company will receive the benefits of European speed and performance AND with the latest Fanuc technology. Eurotech is Fanuc's largest European customer. We just don't "offer" a Fanuc control as many builders. Our machines are built around the Fanuc package. Therefore, the machine software and electronics integrate seamlessly with the standard Fanuc software and electronics. |
|
Our list of customers includes many of the largest and most respected names in the world of manufacturing such as: |
| General Motors | Eaton | Parker Hannifin | Metaldyne | Westinghouse |
| Daimler-Chrysler | Borg Warner | Timken | GKN | MAN |
| John Deere | Pitney Bowes | Westinghouse | Knorr Brake | Linamar |
|
Yes, we have the technology and resources to service even the largest corporations. However, most of our clients are still the smaller, privately held shops that are looking for ways to reduce costs and compete in today's ultra competitive global marketplace. |
What Would Your Bottom Line Look Like
With Much Faster Cycle Times?
|
If you have a current turning center application, allow us to show you how much faster a Eurotech machine will run your part. If you are one of the first 200 respondents, we will send a FREE Sandvik coupon worth up to $600.00. See the next page for details on the offer. So Take The Challenge. See what a Eurotech turning center and 25% faster cycle times can do for your business. Sincerely, Jeff Walz President P.S. All respondents to the Challenge will also receive our FREE report: "Y-Axis - The Key to Increasing Turning Center ROI" |
