|
·
The Eurotech 420SLLY is equipped with a twin turret, sub-spindle, live tools and Y-Axis.
·
Eurotech process includes "pinch turning" and "pinch milling" while holding the part between
both spindles.
·
Previously four operations but is now dropped off complete. Photos show the finished part
following heat treat and grinding.
·
Previous process required four set-ups plus inspection at four stages.Now it's...
Set-up once. Inspected once!
·
Part is unloaded without nicks or dings by gantry arm (pictured below). Gantries are
standard equipment on two and three turret models.
|
